Products

The Belzona catalog.

112 cold-applied repair composites and protective coatings, organized by series. Every product is supplied and applied locally, with 24-hour support.

Belzona 1000 Series

Belzona 1111

Super Metal

A 2-part epoxy-based repair composite designed for metal repair and protection.

Belzona 1121

Super XL-Metal

A 2-part epoxy-based repair composite with extended working life, designed for metal repair and protection.

Belzona 1131

Bearing Metal

A 2-part epoxy-based repair composite with self-lubricating properties for low-friction surfaces and protection from wear and seizure.

Belzona 1151

Smoothing Metal

A 2-part epoxy-based repair composite for rebuilding shallow pitting in metals damaged by erosion and corrosion.

Belzona 1161

Super UW-Metal

A 2-part epoxy-based repair composite for application to wet and oil contaminated metal surfaces.

Belzona 1212

Surface-Tolerant Epoxy

A 2-part surface-tolerant epoxy composite for in-situ metal repair of oil contaminated, wet and underwater substrates.

Belzona 1221

Super E-Metal

A fast-curing 2-part epoxy composite for high speed emergency metal repair packaged in pocket-sized sachets.

Belzona 1251

HA-Metal

A single-component heat-activated paste for repair and protection of hot metal surfaces and equipment suffering from corrosion under insulation.

Belzona 1311

Ceramic R-Metal

A 2-part erosion-corrosion resistant ceramic-filled metal repair composite for rebuilding equipment damaged by fluid flow.

Belzona 1321

Ceramic S-Metal

A 2-part erosion-corrosion resistant ceramic coating for continuous immersion service up to 60°C (140°F).

Belzona 1331

Erosion-Corrosion Resistant Coating

A 2-part spray-friendly erosion-corrosion resistant coating for continuous immersion service up to 50°C (122°F).

Belzona 1341

Supermetalglide

A 2-part hydrophobic erosion-corrosion resistant coating for fluid handling efficiency enhancement, certified for potable water contact.

Belzona 1341N

Supermetalglide (NSF Certified)

An NSF/ANSI/CAN 61 certified 2-part hydrophobic coating for fluid handling efficiency enhancement and potable water service.

Belzona 1381

High Temperature Immersion Coating

A 2-part spray-friendly high temperature immersion coating for erosion-corrosion protection up to 95°C (203°F).

Belzona 1391S

High Temperature Spray Coating

A 2-part spray-applied high temperature coating for continuous immersion up to 110°C (230°F) with FDA and USDA approvals.

Belzona 1391T

Key

A 2-part hand-applied high temperature ceramic-filled coating for continuous immersion service up to 130°C (266°F).

Belzona 1392

Ceramic HT2

A 2-part acid-resistant high temperature coating for erosion-corrosion protection in acid-contaminated systems up to 120°C (248°F).

Belzona 1511

Super HT-Metal

A 2-part high temperature paste for rebuilding metals damaged by erosion-corrosion, designed for use beneath Belzona high temperature coatings.

Belzona 1523

High Temperature Spray Coating

A 2-part spray-applied high temperature coating for continuous immersion in aqueous and hydrocarbon systems up to 140°C (284°F).

Belzona 1593

High Temperature Hand-Applied Coating

A 2-part hand-applied high temperature coating for continuous immersion up to 160°C (320°F) - the highest temperature hand-applied coating in the Belzona HT family.

Belzona 1811

Ceramic Carbide

A 2-part ceramic-filled epoxy for repairing and protecting surfaces against severe abrasive attack with unlimited application thickness.

Belzona 1812

Ceramic Carbide FP

A 2-part ceramic-filled epoxy for repairing and protecting surfaces against abrasive attack, applicable from 1/8 inch (3 mm) thickness.

Belzona 1813

High Temperature Ceramic

A 2-part ceramic-filled epoxy for high temperature abrasion protection up to 190°C (374°F) wet and 210°C (410°F) dry.

Belzona 1814

Heavy-Duty Abrasion Screed

A 3-part ceramic-filled epoxy with separate aggregate for heavy-duty abrasion protection up to 12.7mm thickness.

Belzona 1818

Surface Tolerant Abrasion Resistant

A 2-part fast-cure surface-tolerant abrasion repair material that bonds to wet, damp, underwater, and oil-contaminated surfaces.

Belzona 1821

Fluid Metal Anti-Slip Bonding Resin

A 2-part fluid metal binder for bonding anti-slip aggregate to create durable non-slip surfaces with excellent corrosion resistance.

Belzona 1981

SuperWrap II Low Temperature Resin

A 2-part fast-curing low-temperature resin for SuperWrap II composite repairs, applicable down to 41°F (5°C).

Belzona 1982

SuperWrap II Long Working Life Resin

A 2-part long-working-life resin for SuperWrap II composite repairs with service to 176°F (80°C) and ABS PDA approval.

Belzona 1983

SuperWrap II High Temperature Resin

A 2-part high-temperature resin for SuperWrap II composite repairs with service to 302°F (150°C) and ABS Level 1 fire-resistance approval.

Belzona 1984

SuperWrap II Surface Tolerant Resin

A 2-part surface-tolerant resin for SuperWrap II composite repairs that can be applied to damp, wet, and underwater surfaces.

Belzona 2000 Series

Belzona 2111

D&A Hi-Build Elastomer

A 2-part polyurethane resin designed for the repair, rebuilding and coating of rubber and metal components.

Belzona 2131

D&A Fluid Elastomer

A 2-part polyurethane resin for casting rubber components and coating metal and rubber surfaces.

Belzona 2141

ACR-Fluid Elastomer

A 2-part polyurethane resin for protective coating of high-pressure surfaces against cavitation, abrasion, erosion and corrosion.

Belzona 2211

MP Hi-Build Elastomer

A 2-part polyurethane resin for high-build flexible rubber repair and coating with up to 1000% elongation.

Belzona 2221

MP Fluid Elastomer

A 2-part polyurethane resin for casting and brush- or pour-applied rubber repair with up to 700% elongation.

Belzona 2311

SR Elastomer

A fast-curing 2-part polyurethane resin in pocket-sized sachets for emergency rubber repairs with minimal downtime.

Belzona 2911

Elastomer QD Conditioner

A one-part Quick-Dry elastomer conditioner for fast surface preparation prior to applying Belzona elastomers.

Belzona 2921

Elastomer GP Conditioner

A one-part General-Purpose elastomer conditioner with longer touch-dry time than Belzona 2911.

Belzona 2941

Elastomer SP Conditioner

A one-part Special-Purpose elastomer conditioner that is the preferred choice for metal and concrete substrates in wet or immersed environments.

Belzona 3000 Series

Belzona 3111

Flexible Membrane

A water-based, single-component, liquid-applied roof coating providing outstanding waterproofing and weatherproofing protection.

Belzona 3121

MR7

A 2-part polymer composite for emergency roof repair providing instant waterproofing in all weather conditions.

Belzona 3131

WG Membrane

A moisture-activated urethane liquid roof coating immediately rainproof on application and applicable in cold winter conditions.

Belzona 3211

Lagseal

A water-based acrylic emulsion membrane providing seamless flexible protection of thermal insulation and cladding systems.

Belzona 3412

A 2-part hybrid polymer flange and bolt encapsulation coating providing peelable and resealable long-term corrosion protection.

Belzona 3911

PSC Surface Conditioner

A one-part, solvent-based surface conditioner for porous or bituminous surfaces such as concrete, masonry, wood, asphalt, and mineral felt prior to application of Belzona 3111, Belzona 3211 and Belzona 5151.

Belzona 3921

GSC Surface Conditioner

A 2-part, solvent-based zinc epoxy surface conditioner for non-porous surfaces prior to application of Belzona 3111, Belzona 3211 and Belzona 3131. Also used as a holding primer for steel.

Belzona 3931

WG Membrane Conditioner

A one-part, solvent-based polyurethane surface conditioner for use on porous substrates such as concrete prior to application of Belzona 3131 (WG Membrane).

Belzona 4000 Series

Belzona 4111

Magma-Quartz

A two-component epoxy resin (Belzona 4151) combined with selected quartz particles for repairing and resurfacing concrete and stonework damaged by impact, vibration, chemicals, and environmental attack.

Belzona 4124

Bulkfill

An aggregate filler designed for bulk volume concrete and stonework repairs. Used in conjunction with Belzona 4154 (Bulkfill Resin) and overcoated with Belzona 4111 or 4131 for the wear surface.

Belzona 4131

Magma-Screed

A two-component system of high molecular weight polymers and oligomers incorporated with an aggregate mix, providing excellent protection to concrete from impact, abrasion, and chemical attack.

Belzona 4141

Magma-Build

A two-component, epoxy-based, lightweight, non-porous repair compound specifically designed for rebuilding severely damaged or worn vertical and overhead concrete and stone surfaces.

Belzona 4151

Magma-Quartz Resin

A two-component, solvent-free epoxy resin used as a primer, sealer, and resin component for Belzona 4111 (Magma-Quartz) and Belzona 4131 (Magma-Screed) concrete repair systems.

Belzona 4154

Bulkfill Resin

A two-component, solvent-free epoxy resin designed to be mixed with aggregate (Belzona 4124 or compatible silica sand) for cost-effective bulk-fill concrete and stonework repairs.

Belzona 4181

Magma-Build Acid Resistant

A heat- and acid-resistant 3-component trowelable system for repair and protection of concrete, stone, and rigid substrates subject to impact, abrasion, and inorganic acid attack.

Belzona 4301

Magma CR1 Hi-Build

A high-performance, two-component, paste-grade epoxy with outstanding resistance to concentrated inorganic acids and alkalis. Used for rebuilding chemically wasted surfaces and as a repair filler beneath Belzona chemical-resistant coatings.

Belzona 4311

Magma CR1

A high-performance, two-component barrier coating with outstanding resistance to acids and alkalis. Isolates concrete and metal substrates from chemical environments.

Belzona 4331

Magma CR2

A high-performance, two-component barrier coating optimized for resistance to hot organic acids such as acetic acid, with excellent resistance to a broad range of other chemicals.

Belzona 4341

Magma CR3

A high-performance, two-component barrier coating optimized for resistance to hot inorganic acids such as sulfuric and hydrochloric acid up to 194°F (90°C).

Belzona 4351

Static Dissipative Chemical Resistant Coating

A high-performance, solvent-free, static dissipative barrier coating with outstanding chemical resistance and engineered electrical conductivity for ESD-sensitive environments.

Belzona 4361

Flexible Chemical Resistant Coating

A flexible, high-performance, two-component barrier coating with outstanding chemical resistance and crack-bridging capability for substrates subject to movement.

Belzona 4411

Granogrip Anti-Slip Surfacing

A three-component anti-slip surfacing system with aluminum oxide aggregate that provides a durable non-slip surface on steel, concrete, quarry tile, and wood. Available in Gray and Safety Yellow.

Belzona 4511

Magma-Flex Hi-Build

A two-component, solvent-free, fluid elastomeric sealant for vertical and horizontal building and expansion joints with up to ±12.5% movement. Qualified as ASTM C-719 Class 25, Type M, Grade N.

Belzona 4521

Magma-Flex Fluid

A fast-curing, two-part flexible elastomeric sealant for construction and expansion joints on concrete, stone, brick, and other rigid substrates. 25% movement capable.

Belzona 4911

Magma TX Conditioner

A two-component thixotropic resin system used as a substrate primer and conditioner ahead of Belzona 4000 Series concrete repair products and chemical-resistant coatings. Damp substrate tolerant.

Belzona 4981

Magma TX Conditioner (High-Temp)

A two-component thixotropic resin system used as a substrate primer ahead of Belzona 4000 Series products and as a conditioner for non-metallic surfaces ahead of Belzona high-temperature coatings.

Belzona 5000 Series

Belzona 5111

Ceramic Cladding

A durable, 2-part urethane coating designed for the protection of metallic and masonry surfaces to provide long-term chemical, corrosion and abrasion resistance.

Belzona 5115

High-Gloss Tintable Topcoat

A two-component, high-gloss, 100% solids epoxy-polysiloxane hybrid topcoat for long-term protection of metallic and non-metallic surfaces against weathering, corrosion, and chemical attack.

Belzona 5122

Clear Cladding Concentrate

A water-repellent breathable treatment designed to protect masonry surfaces from water penetration without altering the natural appearance of the structure.

Belzona 5231

SG Laminate

A 2-part epoxy floor coating with non-slip aggregate that delivers excellent chemical and abrasion resistance, fast cure, and a seamless finish for industrial and commercial floor protection.

Belzona 5233

UV Stable Floor Top Coat

A waterborne, 100% solids and UV-stable floor coating designed to provide long-term protection and slip resistance at commercial and industrial facilities, indoors or outdoors.

Belzona 5711

Wind Turbine Leading Edge Repair Cartridge

A high-performance, fast-curing 2-component cartridge system specially designed for repairing erosion and impact damage on the leading edges of wind turbine blades.

Belzona 5721

Wind Turbine Leading Edge Protection Coating

A 2-component, 100% solids, UV-stable coating specifically formulated to protect the leading edges of wind turbine blades from erosion and impact damage.

Belzona 5811

Immersion Grade

A 2-part epoxy coating that delivers outstanding chemical resistance and protects equipment operating under immersion in aqueous solutions up to 122°F (50°C) from the effects of corrosion.

Belzona 5811DW2

DW Immersion Grade

A WRAS-approved variant of Belzona 5811 (Immersion Grade), designed for contact with potable water while delivering the same outstanding chemical resistance and corrosion protection.

Belzona 5812DW

Drinking Water Immersion Coating

A 2-part epoxy-based system applied by brush or spray for protection of metallic and non-metallic surfaces operating under immersion in contact with water and aqueous solutions when potable water approval is required.

Belzona 5813

Static Dissipative Barrier Coating

A 2-component, 100% solids static dissipative barrier coating that transfers surface electrostatic charge build-up away from hazardous areas to prevent sparks and discharges.

Belzona 5815

Containment Grade Flexible Barrier Coating

A two-component, 100% solids and flexible coating system designed for protecting non-metallic and metallic surfaces against short-term chemical immersion and accidental spillages, with greater elongation than other Belzona 5000 Series products.

Belzona 5821

Ceramic Filled Coating

A 2-part, ceramic-filled, 100% solids epoxy coating applied by brush or spray for the protection of metallic and non-metallic surfaces operating under immersion in contact with aqueous solutions, with outstanding erosion-corrosion resistance.

Belzona 5831

ST-Barrier

A 2-part epoxy coating formulated for application to wet, oil-contaminated, and underwater surfaces, displacing water from the substrate to ensure maximum adhesion. Once cured, it forms a barrier coating for protection of equipment operating under immersed conditions or in contact with aqueous solutions.

Belzona 5831LT

Low Temperature ST-Barrier

An environmental moisture-tolerant barrier coating, specially formulated for the protection of metallic and non-metallic surfaces at lower temperatures. Uses moisture-tolerant technology to displace surface contaminants and ensure adhesion to damp, wet, oily, or underwater surfaces.

Belzona 5841

CUI Protection

A 100% solids, 2-part epoxy coating designed to provide outstanding protection to hot metal surfaces against corrosion under insulation (CUI). This surface-tolerant coating can be applied by brush directly onto hot metal surfaces from 30°C to 80°C (86°F - 176°F) with minimal surface preparation required.

Belzona 5851

HA-Barrier

A 100% solids, single-component epoxy coating that cures in contact with hot surfaces and is designed to prevent or protect metal from corrosion under insulation (CUI). Can be easily applied by brush with no weighing or mixing required.

Belzona 5871

Cool-to-Touch Thermal Insulation Barrier

A two-component, polymeric, 100% solids system providing a thermal insulation barrier with corrosion protection and cool-to-touch properties. Applied by brush, cartridge or plural spray, this material expands upon application to produce a lightweight, closed-cell foam, reducing metallic substrate surface temperatures to below 60°C (140°F) while providing corrosion protection.

Belzona 5892

High Temperature Immersion Coating

A 2-part epoxy coating applied by brush or heated airless spray for corrosion protection of metallic surfaces in contact with aqueous solutions at temperatures up to 95°C (203°F). This 100% solids material offers good chemical resistance and is approved for hot potable water by WRAS and NSF/ANSI 61.

Belzona 5911

Ceramic Conditioner

An epoxy-based surface conditioner formulated to enhance adhesion of Belzona 5111 (Ceramic Cladding) systems on nonferrous metallic and cementitious substrates.

Belzona 6000 Series

Belzona 6111

Liquid Anode

A two-part zinc rich epoxy resin designed for the coating of metallic surfaces to provide corrosion protection. This solvent based material is ideal in marine and industrial environments where long-term corrosion resistance is required.

Belzona 7000 Series

Belzona 7111

Marine Grade Chocking

A cost-effective, 2-part, 100% solids chocking/grouting material designed to endure the physical and thermal shock common to marine environments. Belzona 7111 is pourable and is specially formulated to spread out evenly across irregular surfaces.

Belzona 7211

Deep Pour Grout

Belzona 7211 is a three-component, 100% solids, VOC free epoxy system suitable for deep pour grouting of large machine bases, setting large levelling wedges and sole plates. It offers rapid strength development, superior creep resistance, and minimal shrinkage.

Belzona 7311

Structural Adhesive

Belzona 7311 is a fatigue resistant adhesive, optimized for structural bonding applications requiring high mechanical strength, cleavage and shear resistance. Ideally suited for bonding applications subjected to cyclic and repeated load.

Belzona 8000 Series

Belzona 8211

HP Anti-Seize

A high-performance, metal-free anti-seize compound that protects mating metal parts from seizure and galling caused by high temperature, corrosion and chemical attack across a working range up to 1100°C (2000°F).

Belzona 8311

Nato Fluid

A multi-purpose lubrication system for penetration, lubrication, de-watering, and corrosion protection, supplied with a non-pressurised spray pump for easy application by spray, brush, or dripping.

Belzona 8411

Corrosion Inhibiting Wax

A one-part, solvent-based corrosion-inhibiting wax with release properties, designed to be used in conjunction with Belzona 3411 or Belzona 3412 to deliver peelable, resealable corrosion protection on flanges, fastenings, and metal substrates.

Belzona 9000 Series

Belzona 9111

Cleaner/Degreaser

A degreasing and surface preparation agent used to ensure optimal bonding of Belzona materials and to clean application tools and equipment.

Belzona 9121

Universal Thinners

A universal solvent thinner for addition to solvent-based Belzona products to facilitate spray application, and for cleaning application tools and equipment.

Belzona 9211

Supergrip Aggregate

A coarse-grit aluminum oxide aggregate used with Belzona resin systems to produce heavy-duty non-slip and positive-drive surfaces.

Belzona 9221

Surefoot Aggregate White

A fine-grit white aluminum oxide aggregate used with Belzona resin systems to produce anti-slip surfaces with a lighter finish.

Belzona 9231

Aggregate

A fine-grade aluminum oxide aggregate broadcast onto Belzona coatings to create durable non-slip surfaces.

Belzona 9241DW

DW Aggregate

An NSF/ANSI 61 certified aggregate used with Belzona 5812DW or 5811DW2 to rebuild concrete in contact with drinking water.

Belzona 9311

Reinforcement Sheet

A polyester woven open mesh fabric used with Belzona 3111 to reinforce flexible membrane roof and waterproofing systems.

Belzona 9321

Reinforcement Sheet

A flame-retardant fiberglass mesh used with Belzona 3211 to reinforce insulation cladding membrane systems.

Belzona 9331

Reinforcement Sheet

A polypropylene fabric used with Belzona 3121 to reinforce instant waterproofing membrane systems.

Belzona 9341

Reinforcement Tape

A polyester woven open mesh reinforcement tape used with Belzona 1000 Series and 2000 Series products to create reinforced composite repairs.

Belzona 9351

Reinforcement Sheet

A high-elasticity polyester reinforcing sheet used with Belzona 3131 on detail and problem areas requiring exceptional movement capability.

Belzona 9361

Reinforcement Sheet

A thin fiberglass reinforcement fabric used with Belzona 3131 and Belzona 5851 for general-area reinforcement of membrane and barrier coating systems.

Belzona 9371

Reinforcement Sheet

A glass fiber reinforcement sheet used with Belzona resin systems for composite repair and reinforcement of pipework, vessels, and tanks.

Belzona 9381

SuperWrap II Reinforcement Sheet

A glass and carbon fiber hybrid reinforcement sheet pre-qualified with Belzona 1981, 1982, and 1983 for ISO 24817 and ASME PCC-2 compliant SuperWrap II repairs.

Belzona 9382

Release Film

An olefin-based red-pigmented release film used with Belzona 1981, 1982, and 1983 to compact SuperWrap II composite repairs and release from epoxy systems.

Belzona 9411

Release Agent

A single-component release agent applied to molds and mating surfaces to prevent Belzona repair composites from bonding where adhesion is not desired.

Belzona 9611

ES-Metal

A fast-curing epoxy putty stick for emergency sealing of live low-pressure leaks before permanent Belzona composite repair.

Belzona 9621

3D Mesh Repair Kit

A 3D-printed flexible nylon mesh kit for live leak repair on pipework 3 inches in diameter or larger, used with Belzona 1100 and 1200 Series composites.

Belzona 9631

Water-Activated Pipe Repair System

A water-activated, pre-impregnated fiberglass leak sealing wrap for fast emergency pipe repair on metal and plastic substrates.

Belzona 9811

Alumina Tile Sheet

An alumina tile sheet that bonds to substrates with Belzona adhesives to deliver high-performance erosion and abrasion protection.