By Purpose

Browse products by what you need them to do.

A third way into the catalog, alongside series and application. Start from the job — corrosion protection, abrasion linings, metal repair, chemical resistance — and we’ll show the systems built for it.

All products by series Browse by application

Metal Repair / Rebuilding Compounds

These are two-part epoxy composites for cold repair and rebuilding of metal damaged by corrosion, erosion, wear and mechanical damage, applied without hot work. The range spans general-purpose and fast-cure metals, surface-tolerant grades for wet and oil-contaminated substrates, high-temperature and ceramic-filled systems, and SuperWrap II composite pipe-repair resins.

Corrosion Protection

These coatings and systems protect metallic and non-metallic surfaces from corrosion in atmospheric, immersed and high-temperature service. The range spans surface-tolerant barrier coatings, immersion-grade coatings, corrosion-under-insulation (CUI) systems and corrosion-inhibiting waxes and anti-seize compounds.

Chemical Resistant Coatings

These barrier coatings isolate concrete and metal substrates from acids, alkalis and other aggressive chemicals in immersion, splash and spillage service. Different grades are formulated for specific chemistries and temperatures, including hot acid exposure and static-dissipative environments.

Rubber Repair and Protection

These two-part polyurethane elastomers and their conditioners repair, rebuild, coat and cast rubber components and protect metal surfaces requiring flexibility. The elastomers offer high elongation and abrasion resistance, and each is preceded by a matched elastomer conditioner for adhesion.

Weather and Waterproofing Systems

These liquid-applied coatings and membranes waterproof and weatherproof roofs, walls, masonry and exposed structures. The range includes cold-applied roof membranes, emergency leak-repair systems, breathable masonry treatments and protective topcoats.

Concrete Repair

These epoxy resin and aggregate systems repair, rebuild and resurface concrete and stonework damaged by impact, abrasion, vibration and chemical attack. The range includes trowelable build compounds, screeds, bulk-fill systems and quartz-filled resurfacers.

Abrasion Resistant Linings

These linings protect surfaces against sliding, impacting and particle abrasion in bulk-material and slurry-handling equipment. In this catalog the dedicated linings are flexible polyurethane elastomers, complemented by ceramic-filled epoxy repair systems used for the same wear-protection purpose.

Anti-Slip Surfacing

These systems create durable non-slip surfaces on floors, walkways, ramps, stairs and access areas using a resin binder broadcast or mixed with a hard aggregate. They provide slip resistance for pedestrian and traffic areas in industrial and commercial settings.

Chocking Materials

Chocking materials are poured epoxy systems used to mount, align and support rotating and reciprocating machinery on its foundation. They provide full-contact load transfer in place of machined steel chocks, with high compressive strength, creep resistance and minimal shrinkage.

Conditioners and Primers

These are intermediate products applied to a prepared substrate to promote adhesion of a specific Belzona coating or repair system. Each conditioner is matched to particular substrates and to the topcoat or cladding it precedes.

Erosion Corrosion Protection

These coatings protect surfaces exposed to the combined attack of corrosion and flowing or impinging fluids, where erosion continually strips away protective films. The category includes immersion coatings for fluid-handling equipment and UV-stable systems engineered for wind-turbine blade leading edges.

Surface Conditioners

These are conditioning products applied ahead of Belzona membrane and roofing systems to promote adhesion on porous, non-porous and bituminous substrates. Each conditioner is selected according to the substrate type and the membrane that follows.

Casting/Injection Materials

These are pourable, high-strength epoxy systems formulated to flow into and fill voids, cavities and deep sections. In this catalog they overlap with the chocking grouts Belzona 7211 (Deep Pour Grout) and Belzona 7111 (Marine Grade Chocking), which are 100% solids systems poured to support and align machinery.

Cleaners and Thinners

These products prepare substrates and equipment for the application of Belzona repair composites and coatings. They include degreasing and surface-preparation agents and solvent thinners that improve material flow for spray application and clean tools after use.

Joint Sealants

These are flexible, two-part elastomeric sealants for construction and expansion joints in concrete, stone, brick and other rigid substrates. They accommodate joint movement while maintaining a watertight, durable seal.