Nuclear Power Industry
Cold-applied repair composites and protective coatings for the auxiliary and balance-of-plant systems at nuclear power facilities — applied in ASTM Service Level II and III areas outside primary containment.
Our approach
Cold-applied & in-situ
Systems go on cold, on-site — no hot work, no flame, minimal downtime.
Supplied + applied
Take the materials, the trained application, or both — from one local team.
24-hour support
Emergency response across Louisiana, around the clock.
Authorized distributor
Genuine Belzona systems with full technical and warranty backing.
Outside the strictly regulated reactor pressure vessel and primary circuit, nuclear plants run extensive cooling, auxiliary, and balance-of-plant systems that face corrosion, erosion, chemical attack, and structural degradation. Belzona repair composites and protective coatings restore and protect these assets cold and in situ — without hot work or extended outages — in ASTM Service Level II and Service Level III areas outside primary containment.
In a nuclear facility, maintenance outside primary containment is governed by how a coating is classified — ASTM D5144 assigns Service Levels by location, exposure, and safety significance. Belzona materials are applied in Service Level II and III environments, supporting maintenance and life-extension across non-safety-critical and safety-related systems.
Belzona's value in nuclear maintenance is the method as much as the material: systems are applied cold, avoiding hot-work permits; repairs are made in situ, which minimises or eliminates equipment removal and the downtime that comes with it; and the cured systems offer long-term resistance to corrosion, erosion, and chemical degradation. Manufactured under an ISO 9001 quality system for consistent quality and traceability, these product families support maintenance across PWR, BWR, PHWR / CANDU, AGR, and emerging SMR designs.
A closer look at Nuclear Power Industry
Where Belzona systems get specified — open any area to dig in.
01Cooling water and heat-transfer systems
Service-water and cooling systems face corrosion, erosion, and microbiologically influenced corrosion (MIC). Belzona protective coatings restore and protect these surfaces against all three, extending the service life of the cooling and service-water systems without taking them out for replacement.
02Pumps, valves, and associated pipework
Erosion damage, casing defects, and leakage on pumps, valves, and pipework are repaired in situ, minimising or eliminating the need to remove equipment from service. Cold-applied composites rebuild the metal back to profile, and the repair is completed without the hot work a weld repair would require.
03Condensers and heat exchangers
Protective coating systems improve the corrosion resistance and hydraulic efficiency of condensers and heat exchangers. The coatings restore performance without removing the equipment from service.
04Storage tanks and bunded areas
Tanks and bunded areas need long-term corrosion protection in both fully immersed and exposed conditions. Belzona immersion-grade linings and external coatings protect these assets and seal secondary containment against the treatment chemicals used across the plant.
05Concrete and structural assets
Cracked or chemically attacked concrete is repaired and protected with cold-cure coating systems, guarding these concrete and structural assets against further environmental and chemical attack.
06Flanges, joints, and leak sealing
Cold-applied sealing systems stop leakage at flanges, joints, and pipework and allow a rapid return to service. Because the seal is applied cold, the repair avoids the hot-work permit a conventional fix would require.
07Related industries and asset categories
Related power and process sectors: Power and Hydropower Industry, Water and Wastewater Industry, Petrochemical Industry. Asset-level deep dives: Heat Exchangers, Pumps, Tanks & Chemical Containment Areas, Pipelines, Gaskets, Seals & Shims.
In the field
Belzona expertise for Nuclear Power in Louisiana
Our Baton Rouge team will survey your equipment and recommend the right cold-applied Belzona system — supplied, applied, or both, with 24-hour local support.