Overview
Metal resurfacing & weld smoothing is a gaskets, seals & shims application handled with cold-applied Belzona repair composites and protective coatings — supplied and applied in place, typically with no hot work and no shutdown. As the authorized Belzona distributor for Louisiana, our team specifies the right system, then supplies it, applies it, or both. Below are the recommended Belzona products for this application, what each one is used for, and related gaskets, seals & shims work we handle across Louisiana.
See Belzona in action
What this covers
- Resurface of pitted metal surfaces in equipment such as process vessels, heat exchangers and pumps
- Rebuilding erosion-corrosion damage prior to high temperature coating
- Smoothing welds before high temperature coating application
Recommended Belzona Products (2)
About Gaskets, Seals & Shims
Gasket, seal, and shim work is constrained by dimensional tolerance: the gasket has to seat in millimeters, the shim has to land at the correct thickness, and the seal has to hold the system pressure on a face that has not been milled in years. Belzona's form-in-place compounds are specified against those tolerances.
Explore all Gaskets, Seals & Shims applicationsRelated Gaskets, Seals & Shims applications (6)
Have this on your asset?
Our Louisiana team will recommend the right Belzona system and supply or apply it — with 24-hour support, no shutdown, no hot work. We serve Baton Rouge, New Orleans, Lafayette, and Lake Charles across the Mississippi River industrial corridor.