Tanks & Chemical Containment Areas

External pipe & tank corrosion protection

Request a Quote Browse all products

Overview

External pipe & tank corrosion protection is a tanks & chemical containment areas application handled with cold-applied Belzona repair composites and protective coatings — supplied and applied in place, typically with no hot work and no shutdown. As the authorized Belzona distributor for Louisiana, our team specifies the right system, then supplies it, applies it, or both. Below are the recommended Belzona products for this application, what each one is used for, and related tanks & chemical containment areas work we handle across Louisiana.

See Belzona in action

What this covers

  • Coating of pipelines prone to corrosion damage
  • Long-term corrosion protection of hot pipework and process equipment
  • External corrosion protection of pipes and storage tanks providing a pleasing finish
  • Long-term protection against external cathodic corrosion of pipes and storage tanks

Recommended Belzona Products (5)

Belzona 5111

Ceramic Cladding

A durable, 2-part urethane coating designed for the protection of metallic and masonry surfaces to provide long-term chemical, corrosion and abrasion resistance.

Belzona 5841

CUI Protection

A 100% solids, 2-part epoxy coating designed to provide outstanding protection to hot metal surfaces against corrosion under insulation (CUI). This surface-tolerant coating can be applied by brush directly onto hot metal surfaces from 30°C to 80°C (86°F - 176°F) with minimal surface preparation required.

Belzona 5851

HA-Barrier

A 100% solids, single-component epoxy coating that cures in contact with hot surfaces and is designed to prevent or protect metal from corrosion under insulation (CUI). Can be easily applied by brush with no weighing or mixing required.

Belzona 5892

High Temperature Immersion Coating

A 2-part epoxy coating applied by brush or heated airless spray for corrosion protection of metallic surfaces in contact with aqueous solutions at temperatures up to 95°C (203°F). This 100% solids material offers good chemical resistance and is approved for hot potable water by WRAS and NSF/ANSI 61.

Belzona 6111

Liquid Anode

A two-part zinc rich epoxy resin designed for the coating of metallic surfaces to provide corrosion protection. This solvent based material is ideal in marine and industrial environments where long-term corrosion resistance is required.

About Tanks & Chemical Containment Areas

Tank and containment work is governed by the chemistry inside the tank and the regulatory line in the spec sheet: WRAS for potable water, NSF for drinking-water contact, immersion-rated chemical compatibility for process fluids. Belzona offers a graded family of linings to meet each constraint without changing applicators or surface prep approach.

Explore all Tanks & Chemical Containment Areas applications

Related Tanks & Chemical Containment Areas applications (24)

Chemical containment lining8Acid-retaining walls, drains & channels6Anti-slip walkways & access surfaces6Pump bases & tank pads5Tank base sealing4Bund wall/coating for chemical, acid, alkali containment zones3General metal and concrete protection3Rebuilding and sealing bund walls3Corrosion under insulation (CUI) prevention2Hot vessel in-situ external coating2Load-bearing shims2Storage/chemical tanks2Tank base water ingress prevention2Tanks, bunds, chemical zones2ESD / static-dissipative flooring1Fan blade abrasion protection1Flange face & nozzle insert repair1High-grip drive & friction surfacing1
Local · Authorized · Supply + Apply

Have this on your asset?

Our Louisiana team will recommend the right Belzona system and supply or apply it — with 24-hour support, no shutdown, no hot work. We serve Baton Rouge, New Orleans, Lafayette, and Lake Charles across the Mississippi River industrial corridor.

Request a Quote Request a Site Survey